ESI/IVX

1. Enter Programming Mode
2. Press PROG/HELP, PARK, 456# (or new Administrator password)

   TO EXIT: Hang Up

3. Press 1 for System Parameters
4. Press 4 to Set Date/Time
5. Enter new time in a twelve-hour format

   EXAMPLE: Enter 1233 for 12:33 or 315 for 3:15 (No Leading Zeros)

6. Select AM or PM by pressing the scroll keys 
7. Enter a new date in an eight-digit format, including leading zeros

   EXAMPLE: Enter 07042000 for July 4, 2000 (That leading zeros are required here unlike step 3)

Estech Voice Works (this is a Tan colored wall mount unit):

The system clock will maintain correct time even during power outages. The system date is pre-set and requires no changing.

1. Call into VoiceWorks and enter programming by dialing the administrator's password **456#
2. At the "Enter function" prompt, input 320#
3. The current time programmed into the system will be played. 
4. Enter the new time in 12 hour format followed by the # key (Three or four digits must be entered XXX#)

   Example: 812# = 8:12

5. At the "AM or PM" prompt, input "1#" for AM or "2#" for PM
6. At the "Enter function" prompt, input  "111#" to exit programming and disconnect.

Estech Voice Works 16 (this is a Black colored wall mount unit):

VoiceWorks 16 does not automatically update for regions which observe Daylight Savings Time.  However, leap days (quadrennial February 29th) are handled automatically.

1. Call into the VoiceWorks system. During the automated attendant greeting enter programming by dialing the administrator's password **456#
2. At the initial prompt, press 1 to select "System Parameter Programming".
3. The next level of prompts should indicate "Press 6 to Set Time and Date".   Some software versions incorrectly state " Press 7 to Set Time and Date" .   Be sure to press 6 rather than 7.
4. VoiceWorks 16 will announce the current time programmed.
5. To confirm the current time without changing it, press "#", otherwise enter a new time in 12 hour format followed by the # key (Three or four digits must be entered XXX#)

Example: 812# = 8:12

6. Enter "1#" for AM or "2#" for PM
7. Voice Works 16 will announce the newly programmed time.
8. Confirm this time by pressing " #".
9. VoiceWorks 16 will then announce the current date programmed.
10. To confirm the current date without changing it, press "#", otherwise enter the new date as follows:
    • Enter the day of the month and press "#"
    • Enter the month and press "#"
    • Enter the year, in a 4-digit format (example: 2000) and press "#"
11. VoiceWorks will then announce the newly programmed date. Confirm this date by pressing "#".
12. After completing the above, exit programming by pressing 81# or 82#.